The Craftmade K52BN has been discontinued
** See similar or replacement items below **
Craftmade Kona Bay 44" - 56" 5 Blade Indoor / Outdoor Ceiling Fan - Requires Blade Selection
Model: K52BN
Product Overview
This product has additional required/recommended options. To configure, add to your cart.
- Fan Blades Required
- Down Rods Recommended
Craftmade Kona Bay Ceiling Fan
Vacation at your place with the island-inspired damp-rated Kona Bay ceiling fan. Whether you choose 44”, 52”, 54”, 56” or 58” blades, the powerful, 3-speed, reversible Kona Bay ceiling fan can be installed indoors or outside. The Kona Bay is available in Brushed Satin Nickel or Oiled Bronze finishes.
Included Components:
- 3" and 6" Downrods
- Pull Chain Control
- Heavy-Duty, 3-Speed Reversible Motor
Features:
- Lifetime Limited Motor Warranty
- Control Type: Pull Chain
- Dual Mount
- Compatible with Flat or Sloped Ceilings (Up to 35°)
Blade Information:
- Blade Span: 44" - 56" (Depending on Blade Selection)
- Number of Blades: 5
- Blade Pitch: 16°
- Blades Included: No
- Reversible Blades: Yes
Motor Specifications:
- Amperage: 0.57
- Motor: AC Induction
- Motor Size: 188mm x 20mm
- Reversible Motor: Yes
- Cubic Feet per Minute Airflow (High): 5843
- RPM (High): 164
- Voltage: 120
- Energy Efficiency (CFM / Watt): 81
Have a Sloped Ceiling?:
- For ceilings with slope from 35° to 45°, use the 45AD angled ceiling adapter
Have a High or Low Ceiling?:
- The Kona Bay is designed for installation on standard 8 to 9 foot ceilings. If your ceiling is higher, you'll need to purchase an additional downrod. The rule of thumb is that ceiling fans should have a minimum of 7 feet and a maximum of 9 feet of clearance between the bottom of the fan and the floor in order to circulate air efficiently.
Suggested Downrod Lengths:
- 9 Foot Ceiling: 6" - 12"
- 10 Foot Ceiling: 12" - 18"
- 11 Foot Ceiling: 18" - 24"
- 12 Foot Ceiling: 24" - 36"
- 13 Foot Ceiling: 36" - 48"
- 14 Foot Ceiling: 48" - 60"
- 15 Foot Ceiling: 60" - 72"
- For ceiling heights greater than 15 feet, you'll need to purchase the downrod Coupler to join two downrods together.
Additional Craftmade Links
This product is listed under the following manufacturer number(s):
- Craftmade K52BN*
Brushed Nickel - Craftmade K52OB*
Oiled Bronze - Craftmade K52RI*
Rustic Iron
*Denotes a finish or option that has been discontinued.
Manufacturer Resources
Dimensions and Measurements
Included Components
Characteristics and Features
Electrical and Operational Information
Warranty and Product Information
Do It Yourself: Replacing or Installing a Ceiling Fan
Brent Holland shows you step by step how to install or replace yo...
Send to a Friend