The Craftmade K10882 has been discontinued
** See similar or replacement items below **
This product has additional required/recommended options. To configure, add to your cart.
- Down Rods Recommended
- (5) Dark Wood Blades
- (3) Specialty Base Halogen Bulbs
- Uplight, which casts light to the ceiling to softly illuminate the room
- Downrod: 14"
- Lifetime Limited Motor Warranty
- Energy Efficient Motor
- Control Type: Remote
- Blade Span: 56"
- Number of Blades: 5
- Blade Pitch: 14°
- Blades Included: Yes
- Reversible Blades: Yes
- Motor: High Efficiency DC
- Motor Size: 125mm x 30mm
- Reversible Motor: Yes
- Cubic Feet per Minute Airflow (High): 5977
- RPM (High): 187
- Voltage: 120
DC Motor Performance Features:
- Saves 75% more energy versus AC motors
- 6 speed control settings
- Single button reverse settings
- Reaches maximum operating speed quicker than AC motors
- Easy to sync in multiple fan installations (no dip switches in the receiving unit)
- Light weight construction for easier installation
DC Motor Safety Features:
- Motor senses interruption of operation and will discontinue operation if not relieved in three seconds
- Load protection on 40 watts or greater energy consumption
- Each time fan is turned on, it will rotate in the opposite direction for a moment and make a few clicking noises. This is the smart fan speed control calibrating itself to the weight and size of the load.
Have a Sloped Ceiling?:
- For ceilings with slope from 35° to 45°, use the 45AD angled ceiling adapter
Have a High or Low Ceiling?:
- The K10882 is designed for installation on standard 8 to 9 foot ceilings. If your ceiling is higher, you'll need to purchase an additional downrod. The rule of thumb is that ceiling fans should have a minimum of 7 feet and a maximum of 9 feet of clearance between the bottom of the fan and the floor in order to circulate air efficiently. If you have a low ceiling, purchase the CMA flush mount adapter to reduce the hanging height of your fan.
Suggested Downrod Lengths:
- 9 Foot Ceiling: 6" - 12"
- 10 Foot Ceiling: 12" - 18"
- 11 Foot Ceiling: 18" - 24"
- 12 Foot Ceiling: 24" - 36"
- 13 Foot Ceiling: 36" - 48"
- 14 Foot Ceiling: 48" - 60"
- 15 Foot Ceiling: 60" - 72"
- For ceiling heights greater than 15 feet, you'll need to purchase the downrod Coupler to join two downrods together.
This product is listed under the following manufacturer number(s):
- Craftmade K10882*
*Denotes a finish or option that has been discontinued.